Copyright © 2006 REA Elektronik
Seite 18
Rationalisierung
Entwicklung
Automation
Elektronische Geräte und Systeme
21. Venting print heads
Not necessary for pigmented ink
supply systems!
Put
„Dot-Size“-regulator to max. on
controller.
22. Hold print head upright with
nozzle plate pointing upwards
and push purge button in
intervals of 5 to 10 seconds to
flood print head with ink.
23. The procedure is completed
when ink is nicely coming from all
nozzles. Use a lint free cloth to
wipe ink.
Procedure for pigmented inks:
Should a pigmented ink system be used (TV-PP 2L or TV-PL 2L) skip step 21, 22 and 23 and
follow the below described procedure. Also read the respective pigmented ink supply unit manual
carefully.
-
Open door to pigmented ink supply unit.
-
Screw off the transportation cap (without hole) from ink container.
-
Shake the 1 liter ink refill bottle well before use.
-
Fill in 2/3 of the refill bottle into ink container.
-
Shake 1 litre refill bottle well again before you fill in the remaining ink quantity.
-
Close the ink container on pigmented ink supply unit with enclosed cap (use cap with
ventilation hole).
-
Switch on ink supply unit on main switch and start unit by pushing the “Auto” button.
