Copyright © 2006 REA Elektronik
Seite 23
Rationalisierung
Entwicklung
Automation
Elektronische Geräte und Systeme
Place the dismantled nozzle plate on outer edge and
never face down to avoid damages to the nozzle
diamonds which stick out on the inner side.
Loosen the nozzle plate screws using
the right size screw driver.
Lift up the nozzle plate and remove the
nozzle plate sealing ring.
Place nozzle plate into an ultrasonic
bath for approx. 5 minutes.
For ultrasonic cleaning a plastic or glass container filled
with cleaner is recommended. This container with the
nozzle plate inside should be taken into the ultrasonic
tub.
Rinse the ink chamber of the print head with
cleaner.
To clean the plunger no grinding substances, metal
brushes or sharp items should be used not to avoid
leakage of nozzles.
