Copyright © 2006 REA Elektronik
Seite 22
Rationalisierung
Entwicklung
Automation
Elektronische Geräte und Systeme
9
Maintenance
Ink is meant to dry after a certain time.
Ink might also dry on the nozzle plate once in a while. It does not take a lot effort to clean the
nozzle plate again. Therefore please revert to chapter Error! Reference source not found.
Trouble
shooting.
Such as all mechanical devices also the REA-JET print head underlies certain wearing in
dependence of the degree of use. As precaution a rotational service is required at the REA service
department.
Check complete system and all hoses for leakages
once in a while. A certain interval can not be given and
is related to degree of use. A visual check is
recommended at the beginning of each shift.
Maintenance and service inside the system components
are only to be carried out by REA service technicians
and can not be performed by untrained customers.
When dismantling ink hoses ink can leak out. A
container and absorbent cloth or paper should stand by.
In case of damage the system or print head has to be
sent back to REA Elektronik for examination. It is
recommended to use the original packaging for
shipment.
Never use compressed air for cleaning the system and
print heads. This might destroy components. Damages
caused by compressed air can only be repaired at REA
Elektronik service department.
9.1
Cleaning of nozzle plate and ink chamber
Never apply force when installing or dismantling
components to avoid damage. Damages caused by
violence or improper use are not covered by warranty.
When dismantling the nozzle plate switch off the
controller not to accidentally spill serious amounts of ink
within short time.
