Copyright © 2006 REA Elektronik
Seite 17
Rationalisierung
Entwicklung
Automation
Elektronische Geräte und Systeme
15. After all hoses are connected and all cap nuts are tightened thoroughly the controller
and ink supply unit can be connected to power supply respectively to the factory air
supply.
16.
Flushing ink hose:
by pushing down the resistance
spring of the fast ink disconnector
the overpressure built up from ink
supply unit is released and ink
starts to leak out.
17. Let ink level rise up close to quick
ink disconnector.
18. Let a small amounts of ink leak
out to clean the ink hose from
any cleaner remains.
19. Shake out remaining ink from ink
quick disconnector and click into
place on print head.
20. Switch on controller.
