Copyright © 2006 REA Elektronik
Seite 27
Rationalisierung
Entwicklung
Automation
Elektronische Geräte und Systeme
11
Dismantling
Dismantling means to put the printing system out of operation or taking a system apart for service.
Prior to dismantling of ink hoses the ink supply unit has
to be switched off and the pressure needs to be
released by screwing the cap off or by printing without
ink supply unit running. In case of remaining pressure in
the system consumables may leak out.
When working on the ink hoses consumables may leak
out. Make sure you have to have means available (cloth
e.g.) to take up escaping consumables.
To dismantle the system please proceed in the following steps:
1. Switch the controller off.
2. Switch the ink supply unit off and release pressure from ink tank by taking the cap off.
3. Disconnect the print head cable from the unit.
4. Disconnect all hosed from the print head.
5. Take the print head out of the mounting bracket.
6. Should the system be dismantled for service proceed as described in chapter 9.3 to flush the
print head and get it ready for shipment.
12
Disposal
Dispose consumables and cleaning material soaked with consumables in an environmentally
friendly manner. Hints for proper treatment can be taken from respective material data sheet.
The REA-JET print head is made of high quality material which should be recycled.
