Copyright © 2006 REA Elektronik
Seite 9
Rationalisierung
Entwicklung
Automation
Elektronische Geräte und Systeme
8
Fitting and Comissioning
For better understanding of the start up procedure it is described below how to put a system into
operation which consists of the following components:
Print heads SK16
Controller
Input terminal
Ink supply unit
Product sensor
Shaft encoder
When working on the system it is mandatory to protect
from consumables (ink, solvent) which can injure eyes
and skin.
Make sure you have to have means available (cloth
e.g.) to take up escaping consumables.
Before you plug in or plug out any print head
connectors make sure that the controller is switched off.
This way you avoid damage to the electronic
components of the controller and the print head.
With different system configurations the scope of supply can vary. Please always check
with your delivery note for completeness.
8.1
System components
REA-JET
Controller
Input terminal
ST200
