US
E,
M
AI
NT
EN
AN
CE
A
ND
M
AL
FU
NC
TI
ON
IN
G
U
SO
, M
A
N
U
TE
N
ZI
O
N
E
E
G
U
A
ST
I
19
SEGNALAZIONI VISIVE
La scheda elettronica che gestisce il deumidificatore è dotata
di alcuni led di segnalazione, la loro accensione in
sequenze specifiche individua univocamente lo stato di
funzionamento del deumidificatore, vedi figura sottostante.
Presenza di tensione:
La presenza della corretta tensione di alimentazione al
deumidificatore attiva il led verde predisposto.
Funzionamento compressore:
Il led verde che individua il funzionamento del compressore
lampeggerà quando il compressore sta per essere attivato.
Il led verde risulterà acceso quando il compressore è in
funzione.
Funzionamento in modalità ventilazione:
Quando è attivato il consenso della forzatura del ventilatore
il led verde di presenza tensione lampeggia.
Allarme errore sonda NTC:
Il lampeggio del led rosso (di allarme) e giallo (di
sbrinamento) in modalità alternata indica un guasto della
sonda NTC o il superamento dei limiti di funzionamento
impostati. La scheda elettronica attiva la modalità di
protezione disabilitando tutte la uscite tranne quella del
ventilatore.
Allarme termostato limite:
Al superamento della temperatura di 41°C sulla batteria ad
acqua per il pretrattamento dell’aria, si attiva la funzione di
sicurezza che disattiva il compressore lasciando in funzione
il solo ventilatore. La segnalazione visiva è delegata al
lampeggio alternato del led giallo di sbrinamento e del
led rosso di allarme.
Sbrinamento:
La funzionalità di sbrinamento viene attivata
automaticamente ogni 40 minuti per un tempo di 3 minuti.
La segnalazione visiva è delegata al lampeggio del led
verde del compressore.
VISUAL SIGNALS
The electrical board controlling the dehumidifier is equipped with
signalling LEDs. Their different flashing refers to the functioning
of the dehumidifier; see picture below.
Tension:
The correct supply voltage to the dehumidifier activates the
relevant green led.
Functioning of the compressor:
The green led referring to the functioning of the compressor
flashes, when the compressor is going to be activated. The
green led switches on, when the compressor is working.
Functioning of the fan:
When the fan is working, the green led referring to the
presence of voltage flashes.
Alarm malfunctioning for NTC sensor:
The red led (alarm) and the yellow led (defrosting) flashing
alternately imply that NTC sensor is out of order or the pre�set
functioning limits have been exceeded. The electrical board
activates the protection mode, deactivating all outlets except
for the fan.
Alarm for thermostat limit:
Once the temperature of the water coil for the air pre�
treatment exceeds 41 °C , the safety mode is on and
deactivates the compressor, while the fan keeps working.
The red led (alarm) and the yellow led
(defrosting) flash alternately.
Defrosting:
The defrosting mode is automatically
activated every 40 minutes and
lasts 3 minutes. The green led of the
compressor flashes.
Led sbrinamento (giallo)
Led sbrinamento (giallo)
Led allarme (rosso)
Led allarme (rosso)
Led compressore (verde)
Led compressore (verde)
Led pres. tensione (verde)
Led pres. tensione (verde)
Summary of Contents for RNW 400 CS
Page 2: ......
Page 28: ...cod 9100072 03 10 2011...