chapter 5
41
Graphics are for representation only. Your unit might differ from pictures in this book.
Additional Information
How to find your TV’s Video Input Channel
In order to see what’s playing on your DVD Player, you need to tune the TV to the Video
Input Channel that corresponds to the jacks you used to hook up the recorder to the TV. The
Video Input Channel(s) varies for different brands and different models of TVs. Below are
some things to try.
•
Consult the Owner’s Manual that came with your TV.
•
If you can’t find the information in the manual, or can’t find the manual, review the
following list of ways to access Video Input Channels on TVs.
There might be a button on the TV’s remote control that accesses the Video Input
Channel (see table below for examples).
You might select the Video Input Channel from the TV’s menu system.
You might tune to it by pressing a specific channel number (see table below)
Press the Channel up and/or down buttons on the TV’s remote control (sometimes the
Video Input Channel is stored in the channel list).
Video Input Channel Variations
Button/Switch
Button on the
Channel
on the TV
TV remote
Number
VIDEO
VID1
S-VID
00
93
SIGNAL
LINE
INPUT
90
VID 1
VID 1
VID
SOURCE
91
VID 2
VID 2
VIDEO
AUX
92
INPUT
DRC700.part2.7.26.02 8/1/02 11:09 AM Page 41
