22
chapter 3
IntroScan
Use this feature to preview the first few seconds of each track on a CD.
1. While the CD is playing, press INFO (the Info Display appears).
2. Use the arrow buttons to highlight the IntroScan icon. Press OK (the
first few seconds of each track starts playing). To stop IntroScan, press
the STOP button.
Virtual Light
This feature is turned on and off through the DVD player’s menu system.
When Virtual Light is on, random colored patterns move on the screen in
time to the music being played. See page 33 for instructions.
Random
1. While you’re playing a disc, press INFO (the Info Display appears).
2. Press the left or right arrow button to highlight the Play Mode icon.
3. Press the down arrow button until
Play Mode: Random
appears at the bottom of the Info
Display (the tracks start playing in random order).
To switch back to Standard Playback, follow steps 1 through 3 above until
Play Mode:
Standard
appears underneath the Info Display icons.
Note: The player defaults to Standard Playback whenever you put a new CD into the DVD player.
Program
The Program Play Mode is only available after you set up a program. Go to page 27 for
instructions.
Playing Discs
Using the Play Mode Feature
Play Modes are available from the Info Display when you’re playing an
audio CD. The Play Mode feature lets you set up the order in which you
want the tracks on the CD to play. There are three Play Modes:
Standard: the tracks play in the same order as listed on the CD (starting
with track 1). This is the default play mode.
Random: the tracks on the CD play in a random order.
Program: the tracks play in the order you designate. To use the Program
play mode, you must set up the order in which you want the tracks to
play in the DVD Player’s main menu system.
