![background image](http://html2.mh-extra.com/html/rbi/futera-xlf-series/futera-xlf-series_control-manual_4019307066.webp)
OPTIONAL FEATURES
HeatNet Control V3
Page 66
This screen is an excellent way to diagnose system
problems and tune systems for optimal performance.
Data Points can also be viewed in a manner other than a
histogram as pictured below. The date/time picker can be
used to mine the raw data stored on the HeatNet Online
server.
Runtime graphs of each boiler ensure even runtimes are
being observed by a properly operating system.
This is just an overview of HeatNet Online and a few of
the screens that are available.
Wiring Connections
Figure 48
Dip Switches and Wiring
Wire Strip Length.
If the terminal blocks are of the
screwless
type, the wire should be stripped to
.42” or 10.67mm.
If the terminal blocks are of the
screw
type, the wire should be stripped
to .25” or 6.34mm.
Summary of Contents for FUTERA XLF Series
Page 27: ...CONTROL METHODS HeatNet Control V3 Page 27 Figure 25 Base loading relay...
Page 67: ...WIRING CONNECTIONS HeatNet Control V3 Page 67 Figure 49 Jumper Dip Switch Locations...
Page 73: ...WIRING CONNECTIONS HeatNet Control V3 Page 73 Figure 57 Temperature sensors...