Razorgage Cyclone RazorOptimal, User Manual

Page: 33 / 55

Cyclone RazorOptimal User Manual
33 | P a g e
Technical Services, Inc.
Vertical Clamp Stroke Distance
The cylinder stroke of the vertical clamp is adjustable to allow material of varying thickness to pass under
the clamp. This adjustment may be necessary when material thickness changes. To adjust the vertical
clamp, locate the vertical clamp flips stops underneath the table top on the right side of saw. Swing the
flip stop to the back to engage or swing to the front to disengage the stops. The more stops engaged
the shorter the vertical clamp stroke.
Guide Rollers
The Cyclone RazorOptimal is equipped with guide rollers to support the material as it is being feed
through the saw. The guide rollers apply downward pressure to the material. The rollers are slightly
angled toward the back fence to keep the material close to the fence while being advanced. If a printer
is used, the right-side guide roller height adjustment sets the gap distance of the printer to the board.
A
printer head gap of 3/32” should be maintained.
The roller & printer assembly can be adjusted
vertically by moving the aluminum bracket along the slotted hole in the painted mounted bracket .