Cyclone RazorOptimal User Manual
11 |
P a g e
Technical Services, Inc.
Electrical Interface Connections
The Cyclone Optimal system used a RazorGage automated positioner. To connect the RazorGage to
the Cyclone saw an interface cable, valve cable, crayon sensor cable, and board sensor cable will need
to be connected. The interface cable and valve bank cables are prewired from the factory and need only
to be plugged back into to the saw. The interface cable connects to the underside of the saw control
cabinet and the valve bank cable to the DIN connector on the valve bank. The crayon and board sensor
cables will need to be wired to the crayon optimal circuit board in the RazorGage tower. Follow the
sensor type and color code of the cable conductors marked next to the terminals on the board. The
printer has a power cord that plugs into the power strip at the bottom on the tower and also an ethernet
cable that plugs into the crayon board.
Summary of Contents for Cyclone RazorOptimal
