Razorgage Cyclone RazorOptimal, User Manual

Page: 20 / 55

Cyclone RazorOptimal User Manual
20 | P a g e
Technical Services, Inc.
If you have the Raz-Array option, press the RAZ-ARRAY button on the left-hand side of the screen. The
description of the variables is below. Use APPLY CHANGES button to update changes to parameters.

SELECT THE FIELD… – Use the dropdown list to select field in the cutlist that contains the Raz-
Array bin numbers.

SWITCH THE ROW DIRECTION
– Check this box to change row #1 from the top to the bottom.

SWITCH THE COLUMN DIRECTION
– Check this box to change column #1 from the left to the
right.

SELECT HOW THE BINS ARE LAYED OUT
–
Horizontally layout is where the bins count up
horizontally first then increments vertically. Vertically layout is where the bins count up vertically
first then increments horizontally.

SIMULATE NEXT BUTTON
– Changes active bin to the next bin in the que.

CLEAR BIN AND BIN QUE
– Deactivates current bin and clears bin que.

CLEAR BIN, BIN QUE AND LOAD FOR BIN TESTING
– Clears current bin and bin que.
Activates bin #1 and populates the que with sequential bins from 2
– maximum. Use the
SIMULATE NEXT BUTTON to set through testing bins.
Raz-Array Parameters
These settings should get your machine into good operating condition. Fine tuning some of these
parameters may be necessary
to customize the machine’s operation to your needs.