Raytheon Anschütz SYNAPSIS ECDIS, Operator'S Manual

Page: 248 / 434

Operator Manual
Raytheon Anschütz GmbH
Germany
R
SYNAPSIS ECDIS
8--37
4343DOC020102 Edition: November 2019
The following parameters can be adjusted for SAR patterns:
-- Start Position
-- Own Ship’s Position (follow own ship)
-- MOB Position
(only available if MOB is set)
-- Cursor (set Start Position with the cursor, initially at own ship)
-- Speed
-- XTD Limit
-- Turn Radius
-- Leg Distance
-- Leg Spacing (only for Parallel Track)
-- Number of Squares (only for Expanding Square)
-- Number of Cycles (only for Sector)
-- Number of U--Turns (only for Parallel Track and Expanding Track)
-- Orientation (default to direction of the drift if available, otherwise to own COG)
-- Action (what shall be done automatically after pressing OK)
-- Save, set as Primary Route, start Route Monitoring (only available on
Route Server)
-- Save, set as Primary Route (only available on Route Server)
-- Save, set as Secondary Route
-- Just save the Route
-- Route Name (default „SAR date time“, e.g. „SAR 20151209 093014“)
Optionally the chart display may be set in an auto scale mode. This will cause
the chart to rescale each time the SAR pattern type or a parameter which effects
the dimension of the SAR pattern is changed.
The distance along the SAR pattern route and the time duration to sail along the
pattern with the set speed are constantly updated.
With the OK button the SAR pattern route is saved under the given route name
and the selected action is executed.