Raytheon Anschütz SYNAPSIS ECDIS Operator'S Manual Download Page 81

Page: 81 / 434

Operator Manual

4--14

4343DOC020102

Edition: January 2016

Command Buttons:

Verify Update Status

Click on

Verify Update Status

for verifying the cells.

tep 1

Select

Verify Update Status

Step 2

The Report Options dialog box appears (Fig. 4--6).

Step 3

Choose the kind of report (Summary Report or Full Report).

Step 4

Choose the filter options (Complete or Filtered by Routes).

NOTE

The filter options are only available for IHO S63 charts.

Step 5

Select

Start

to create the report.

Figure: 4--6 Report Options

Summary of Contents for SYNAPSIS ECDIS



















































































































































































































































































































































































































































Search results

Summary of Contents for SYNAPSIS ECDIS

Reviews:

Raytheon Anschütz SYNAPSIS ECDIS, Operator'S Manual, Page: 81 / 434

Search results

Summary of Contents for SYNAPSIS ECDIS

Reviews: