Raytheon Anschütz SYNAPSIS ECDIS, Operator'S Manual, Page: 330 / 434

Operator Manual
11--12
4343DOC020102 Edition: January 2016
Position Receiver:
This list box contains the integrated position receivers.
Selection is performed either via the scroll bar or directly via the cursor.
While plotting the trail type of position receiver is indicated at each interval
mark.
Max. Visible length:
This entry determines the maximum displayed length of the position trail.
Dependent on the runtime of the ECDIS, the displayed length can be shorter
than the set value.
Time marker interval:
This entry determines the labeling intervals in minutes.
While plotting the trail each section is marked with a time label.
Display the Recorded Tracks:
To display the recorded tracks select the desired track via cursor from the
recorded tracks list.
Command Buttons:
Show
The recorded track is superimposed on the chart. As a recorded
track may be some weeks old its location has to be looked up
manually if you want to see it on the screen zoom out as far as
necessary and look for the recorded track, then zoom in the
selected trail.
Hide
The recorded track is removed from display.
Delete
Deletes recorded tracks.
Besides automatic registration of all ship‘ s navigation data, the ships‘ s position
can additionally be marked using the
Mark at Ship function (see chapter 7.1.4).
This event will also be listed in the recorded tracks list and be marked with an
asterisk if the
Show user defined ship marker Mark at Ship check box is acti-
vated.