Raytheon Anschütz SYNAPSIS ECDIS, Operator'S Manual, Page: 258 / 434

Operator Manual
Raytheon Anschütz GmbH
Germany
R
SYNAPSIS ECDIS
8--47
4343DOC020102 Edition: November 2019
8.2.4.5 Protect / Unprotect
The Protect Route command allows you to protect routes against accidental
deletion and content changes. The Unprotect Route command allows you to
deprotect previously protected file(s).
Procedure:
Step 1 Select Route Manager from the Routes menu.
Step 2 Click on the route name(s) you want to protect or deprotect.
Step 3 Click on Protect or Deprotect button (the button inscription is
Protect or Deprotect depending on the protect state of the selected
files). The selected routes are protected or unprotected depending on
the chosen operation.
8.2.5 Toggle Routes
The menu function Toggle Routes allows quick switching between a primary and
a secondary route.
For this action, both routes must be defined within the same part of the sea
chart.
Procedure: (Figure: 8--33)
Step 1 Select Open Route from the Routes menu..
Select Toggle Routes . Route priority changes at once.
The Primary Route is shown in red, thin, and dashed line
The Secondary Route is shown in red, thin, and dashed lines.