Raytheon Anschütz SYNAPSIS ECDIS, Operator'S Manual, Page: 203 / 434

Operator Manual
7--4
4343DOC020102 Edition: January 2016
7.1.2.1 Changing Ship’s Position
Procedure : (Figure: 7--3 and Figure: 7--4)
Step 1 Select the ship menu (Figure: 7--1).
Step 2 The cursor changes to target shape and the Ship Offset dialog box
appears. (Figure: 7--4).
Step 3 Enter the offset using the display
a) Click on ARPA target. The targets label appears in
the Selected area.
b) Click on the Navigational Aid over which the target should appear.
The navigational aid label appears on the Selected area.
Enter the offset using latitude and longitude
a) Click on
OK .
The new offset (in meters) appears in the Latitude and Longitude
box, and the ship is repositioned on the screen.
Step 4 To cancel an offset
a) Select Position Offset from the Ship menu. The cursor
changes to target shape, and the Ship Offset dialog box appears.
b) Click on Zero at the bottom of the dialog box.
The entries in the latitude and longitude box will return to zero, and
the boat is repositioned on the display.
c) Click on OK .
Figure: 7--4 Position Offset