Operator Manual
8--66
4343DOC020102
Edition: November 2019
8.2.13.5
Reactivating Track Control
When you -- after an interruption -- are ready to reactivate track control, you can
open the Steer to Track dialog box and select a waypoint on the route as the
active waypoint you want to navigate to.
Procedure:
(Figure: 8--48)
Step 1
Select
Track Control
from the Routes menu.
(Alterative selection, place the Target Cursor on a waypoint and click
the right button.
Select
Track Control
from the menu box which appears)
Step 2
Move the cursor over the waypoint to which you want to navigate and
click, or use the left and right arrow keys at the top left hand corner of
the dialog box.
The following message will appear
indicated only
if NP203x or
NP5500
is installed
Step 3
Figure: 8--48
Steer to Track dialog box
Step 3
Click on
OK
. Track Control is reactivated.
Summary of Contents for SYNAPSIS ECDIS
