5-30
HSB Series Color LCD Display
Using
T
ra
ck
s
5.7 Using Tracks
The Track function is used to mark on-screen the trail that your vessel has
followed, as if it had left a visible fixed wake.
While the track is turned on, it is recorded in the display unit’s memory. You
specify the interval at which track points are made, a line is drawn on-screen
between each point. Up to 4500 track points can be saved in total, in up to 5
track files (each a maximum of 750 points).
The track remains on-screen, even following a power off/on, until you clear
the track.
A track can be saved and retrieved for display at a later date. For example, you
may wish to display a previous track, and then place waypoints along it that
you can follow. You can only display one track at a time; you must clear a
current track from the screen if you want to display a saved track.
This section describes:
•
Setting up a track, including how to specify the interval.
•
Clearing the current track.
•
Managing tracks, using the track list, including Saving, Naming, Erasing
and Showing a track.
➤
To access the track controls:
1. From the chart display, press the
MENU
key to display the chart set up soft
keys.
2. Press the
TRACK SETUP
soft key to display the Track soft keys:
The following instructions assume you have the track soft keys displayed.
Setting Up a Track
You use the track soft keys to switch the track on and to specify the interval at
which track points are saved. The interval default is a distance of 0.1nm. The
maximum track length is 500 points, when the track has reached this length,
the first points are overwritten. The track is saved until you switch it off.
➤
To set up a track:
1. Press the
TRACK INTERVAL
soft key.
Press the appropriate soft key to set either a time interval or a distance inter-
D4162-1
SYSTEM
SET UP!
CHART
SET UP!
TRACK
SET UP!
GPS
SETUP!
D4179-1
TRACKS
OFF ON
CLEAR
TRACK
TRACK
LIST
TRACK
INTERVAL
TRACK
INTERVAL
Summary of Contents for hsb2 Series
