4. Place the Quantum
™
scanner in position. If you are fitting it on a planing vessel, shim the rear of
the scanner, so that the beam points slightly down in the forward direction when the boat is at
rest, to compensate for the bow rising at cruising speed
Item
Description
1
Mounting platform, non-planing boat (level install)
2
Mounting platform, planing boat (typical planing angle shown)
5. Before securing the scanner to the mounting platform, connect the power cable (and optionally a
data cable), ensuring that all cables are routed appropriately. See the
section for further information about making connections, and cable routing.
6. Ensuring that the bolts have a
minimum
insertion in the scanner base of 16 mm (0.63 in.), and
a
maximum
of 22 mm (0.87 in.) (allowing for washers), secure the scanner with the 4 bolts, flat
60
