Cable routing — pole mount
There are 2 typical cable routing scenarios for pole mount installations.
• Using separate power and data cables.
• Using an existing combined power / data cable from an older Raymarine Digital Radar scanner. In
this scenario, the
A80308
Y-adapter accessory is required (not supplied with the scanner).
Using separate power and data cables
Note:
The routing options described and illustrated in this section assume that a physical data
connection is used between your Radar scanner and multifunction display (MFD). However, if the
scanner is connected to your MFD via Wi-Fi, a physical RayNet connection is not required.
The following drawing illustrates the cable routing for a scanner mounted on a platform, using
separate cables for the power and data connection.
1.
RayNet data connection.
2. 12 V / 24 V power connection.
Note:
• A separate power cable is supplied with all Quantum
™
Radar variants.
• Not all Quantum
™
radar variants are supplied with a RayNet cable. Refer to the
Document and product information
section for more information.
• Refer to the
RayNet to RayNet cables and connectors
section for information on suitable
accessory RayNet cables.
46
