Raymarine E120W, Installation Manual

Page: 50 / 58

44 E-Series Installation Manual
SeaTalk
hs
network switch connection tests
To ensure that your SeaTalk
hs
network switch is connected, you should check the
following:
• The Switch should display a static green light (right) and a flashing green light (left)
for each connecting port. If your switch is only displaying a left flashing light, data
will be transferred but the connection will be at low speed.
• Open a radar, chart and fishfinder application window on all display units and
check that the appropriate data is displayed throughout the network.
If you are not receiving any data, check the cable connections to the rear of the display
and the SeaTalk
hs
Switch. If the problem persists, please contact Raymarine Technical
Services (see
page 50
).
Setting up the NMEA for AIS or Navtex
If you have a Navtex or AIS receiver attached to the NMEA 0183 port, you will need to
change the NMEA Port Setting. This feature is accessed via the System Setup Menu/
System Integration Setup Menu.
You can connect either AIS or Navtex or other instrument to one display. In multiple
display systems each display can be configured independently and all data will be
shared across the system.
Instrument data tests
To ensure that your system is receiving instrument data, you should check the
following:
From SeaTalk or SeaTalk
2
Open the instrument application and ensure all relevant data is displayed. If you are
not receiving data, check cable connections.
From third party devices on NMEA 0183
Check that appropriate NMEA sentences are being sent from the third party device and
on the E-Series Display. Open the instrument application and ensure all relevant data is
displayed.
Connected to equipment
to NMEA port
Setting Additional information
General NMEA instruments NMEA 4800 Default setting
Navtex receiver Navtex 4800
Navtex 9600
Please refer to your Navtex receiver manual
for details of the appropriate setting.
AIS receiver Navtex 38400