Raymarine E-Series, Installation Instructions Manual

Page: 50 / 112

4.15 AIS connection
A compatible AIS unit can be connected using
SeaTalk ng® or NMEA 0183 .
Connection using SeaTalk ng®
D12263-2
SeaTalk
ng
1
3
2
1. MFD
2. SeaTalk ng® connection to MFD .
3. SeaTalk ng® AIS receiver / transceiver.
An AIS unit can be connected to the MFD by
following the details provided in section 4.9 NMEA
0183 connection — Power/NMEA/Video cable and
the installation instructions provided with the unit.
4.16 Fastheading connection
If you wish to use MARPA (radar target acquisition)
functions on your multifunction display you need
either:
• An autopilot connected to the multifunction display
via SeaTalk ng or NMEA 0183. The compass is
connected to the course computer and calibrated
via the pilot control head; or:
• A Raymarine or third-party fastheading sensor
connected to the multifunction display via NMEA
0183.
Note: Please contact your dealer or Raymarine
technical support for more information.
50 a Series / c Series / e Series installation instructions