Raymarine E-Series, Installation Instructions Manual

Page: 51 / 112

4.17 Keypad network connection
Raymarine ® remote keypads (e.g. the RMK-9 )
can be connected directly to the display’s network
connection or can be connected to the
SeaTalk hs
network, via a Raymarine ® network switch.
Multiple keypads can be connected to a system, with
each keypad capable of controlling up to 4
MFD s.
D12694-3
4
1
2 3
1. MFD
2. Network connection to MFD or Raymarine ®
network switch ( RayNet cable)
3. RMK-9 Keypad
4. Alternate power connection (Right angled power
cable)
Note:
a. When connecting the keypad directly to
the
MFD , unless the MFD is capable of
providing power over ethernet the keypad
must be powered separately, using the
alternate power connection.
b. When connecting the keypad via a network
switch the keypad must be powered
separately, using the alternate power
connection.
For further information regarding keypad installation
(including power connection and mounting), refer to
the installation instructions supplied with the keypad.
Once connected the keypad must be paired with the
each
MFD you want it to control.
4.18 Weather receiver connection
A Sirius XM weather receiver can be connected
directly to the display’s network connection or can
be connected to the
SeaTalk hs network, via a
Raymarine ® network switch.
S eaTalk
hs
/ RayNet
0
0 0
0
0 0
A UDIO 0 0 0 ANTENNA 0 NETWORK 0 0 POWER 00
D12902-3
1 2
1. Raymarine weather receiver
2. MFD
For information on connecting an SR50 using
SeaTalk
ng please refer to 82257 – SR50 operation
which can be downloaded from the Raymarine
website:
www.raymarine.com .
For further information regarding weather receiver
installation (including power connection and
mounting), refer to the installation instructions
supplied with the weather receiver.
Note: You must select your Raymarine
Weather receiver in the Weather Set-up menu:
( Homescreen > Set-up > System Settings >
External Devices > Weather Set-up .
Cables and connections 51