Raymarine E-Series, Installation Instructions Manual

Page: 90 / 112

Note: The viewing angles stated above were taken
using internationally agreed standards and should
be used for comparison purposes only. Do NOT
install the product before testing its viewability in
the desired location.
a Series Display specification
a6x a7x a9x a12x
Size 5.7 in 7 in 9.0 in 12.1 in
Type TFT
backlit
LED TFT
backlit
LED TFT
backlit
LED TFT
backlit
LED
Color
depth 24–bit 24–bit 24–bit 24–bit
Resolu-
tion 640 x 480
VGA 800 x 480
WVGA 800 x 480
WVGA 1280
x 800
WXGA
Aspect 4:3 16:9 16:9 16:9
Maxi-
mum al-
lowable
wrongly
illumi-
nated
pixels 5 6 6 6
a6x and a7x Data connections
Wired connections
NMEA 2000 1 x SeaTalk ng® connection
Network ( SeaTalk hs ) 1 x RayNet type SeaTalk hs
port. 10/100 Mbits/s
Wireless connections
Wi-Fi 802.11 b / g
Note: Wi-Fi connection
only applies to Wi-Fi variant
displays.
Bluetooth Bluetooth 2.1 + EDR power
class 1.5 (supported profile:
AVRCP 1.0)
a9x and a12x Data connections
Wired connections
NMEA 0183 • NMEA port 1: Input and output, 4800
/ 38400 baud rates
• NMEA port 2: Input only, 4800 /
38400 baud rates
NMEA 2000 1 x SeaTalk ng® connection
Network
( SeaTalk hs )
2 x RayNet type SeaTalk hs port. 10/100
Mbits/s
GA150 1 x TNC type external GPS / GLONASS
antenna connection
Video input 1 x BNC type video input connection
Wireless connections
Wi-Fi 802.11 b / g
Bluetooth Bluetooth 2.1 + EDR power class 1.5
(supported profile: AVRCP 1.0)
Internal GPS specification
The Internal GPS specification applies to the
following MFDs a Series (excluding a9x and a12x), c
Series and e Series (excluding the e165).
Channels 50
Cold start <2 minutes
Refresh rate
5 Hz
Receiver IC Sensitivity
163 dBm Tracking
Satellite Based Aiding
System (SBAS) WAAS + EGNOS + MSAS
Special features
Active Jamming Reduction
Operating frequency 1575.42MHz
Signal Acquisition Automatic
Almanac Update Automatic
Geodetic Datum WGS-84, alternatives
available through Raymarine
displays.
Update Rate 1 second
Antenna Ceramic chip
Accuracy • Without SBAS: <= 15
metres 95% of the time
• With SBAS: <= 5 metres
95% of the time
Internal GNSS (GPS / GLONASS) receiver
specification
Channels 72
Cold start <2 minutes
Receiver IC
Sensitivity –167 dBm (Tracking) / –148 dBm
(Acquisition)
GNSS
compatibility • GPS
• GLONASS
• * Beidou
SBAS
compatibility • WAAS
• EGNOS
• MSAS
Special features Active Jamming and Interference
Reduction
Operating
frequency • GPS L1 C/A
• GLONASS L10F
• Beidou B1
Signal Acquisition
Automatic
Almanac Update Automatic
90 a Series / c Series / e Series installation instructions