Raymarine E-Series, Installation Instructions Manual

Page: 41 / 112

Warning: Positive ground systems
Do not connect this unit to a system which
has positive grounding.
4.6 SeaTalk ng® connections
The MFD can connect to a SeaTalk ng® backbone.
SeaTalk ng® can be used to communicate with:
• SeaTalk ng® instruments
• SeaTalk SeaTalk ng® autopilots
• SeaTalk equipment via the optional SeaTalk to
SeaTalk ng® converter
• NMEA 2000 equipment via optional DeviceNet
adaptor cables
Typical SeaTalk ng® system
00
D12176-5
12 V / 24 V dc
1 2
6
9 1 0
8
7
3
4
5
1. SeaTalk ng® instrument
2. SeaTalk ng® pilot control head
3. iTC-5 converter
4. Wind transducer
5. MFD
6. Power supply
7. SeaTalk ng® autopilot
8. iTC-5 converter
9. Depth transducer
10. Speed transducer
For details of SeaTalk ng cabling please refer to
Chapter 10 Spares and accessories .
SeaTalk
ng
power requirements
The SeaTalk ng bus requires a 12 V power supply.
Power may be provided from:
• Raymarine equipment with a regulated 12 V power
supply (for example, a SmartPilot SPX course
computer); or:
Cables and connections 41