Raymarine E-Series, Installation Instructions Manual

Page: 8 / 112

Caution: Transducer cable
• Do NOT cut, shorten, or splice the
transducer cable.
• Do NOT remove the connector.
If the cable is cut, it cannot be repaired.
Cutting the cable will also void the
warranty.
Caution: Power supply protection
When installing this product ensure the
power source is adequately protected
by means of a suitably-rated fuse or
automatic circuit breaker.
Caution: Care of chart and memory
cards
To avoid irreparable damage to and / or
loss of data from chart and memory cards:
• DO NOT save data or files to a card
containing cartography as the charts
may be overwritten.
• Ensure that chart and memory cards
are fitted the correct way around. DO
NOT try to force a card into position.
• DO NOT use a metallic instrument such
as a screwdriver or pliers to insert or
remove a chart or memory card.
Caution: Ensure card reader door
is securely closed
To prevent water ingress and consequent
damage to the product, ensure that the
card reader door is firmly closed.
Caution: Sun covers
• If your product is supplied with a sun
cover, to protect against the damaging
effects of ultraviolet (UV) light, always
fit the sun cover when the product is
not in use.
• Sun covers must be removed when
travelling at high speed, whether in
water or when the vessel is being
towed.
Caution: Product cleaning
When cleaning products:
• If your product includes a display
screen, do NOT wipe the screen with
a dry cloth, as this could scratch the
screen coating.
• Do NOT use abrasive, or acid or
ammonia based products.
• Do NOT use a jet wash.
TFT Displays
The colors of the display may seem to vary when
viewed against a colored background or in colored
light. This is a perfectly normal effect that can
be seen with all color Thin Film Transistor (TFT)
displays.
Water ingress
Water ingress disclaimer
Although the waterproof rating capacity of this
product meets the stated IPX standard (refer to the
product’s
Technical Specification ), water intrusion
and subsequent equipment failure may occur if the
product is subjected to commercial high-pressure
washing. Raymarine will not warrant products
subjected to high-pressure washing.
Disclaimers
This product (including the electronic charts) is
intended to be used only as an aid to navigation. It
is designed to facilitate use of official government
charts, not replace them. Only official government
charts and notices to mariners contain all the current
information needed for safe navigation, and the
captain is responsible for their prudent use. It is
the user’s responsibility to use official government
charts, notices to mariners, caution and proper
navigational skill when operating this or any other
Raymarine product. This product supports electronic
charts provided by third party data suppliers which
may be embedded or stored on memory card. Use
of such charts is subject to the supplier’s End-User
Licence Agreement included in the documentation
for this product or supplied with the memory card
(as applicable).
Raymarine does not warrant that this product is
error-free or that it is compatible with products
manufactured by any person or entity other than
Raymarine.
This product uses digital chart data, and electronic
information from the Global Positioning System
(GPS) which may contain errors. Raymarine does
not warrant the accuracy of such information and
you are advised that errors in such information may
cause the product to malfunction. Raymarine is not
responsible for damages or injuries caused by your
use or inability to use the product, by the interaction
of the product with products manufactured by others,
or by errors in chart data or information utilized by
the product and supplied by third parties.
RF exposure
This equipment complies with FCC / IC RF exposure
limits for general population / uncontrolled exposure.
The wireless LAN / Bluetooth antenna is mounted
behind the front facia of the display. This equipment
should be installed and operated with a minimum
distance of 1 cm (0.39 in) between the device and
the body. This transmitter must not be co-located
8 a Series / c Series / e Series installation instructions