Raymarine E-Series, Installation Instructions Manual

Page: 43 / 112

4.8 SeaTalk connection
You can connect SeaTalk devices to your MFD using
the optional SeaTalk to SeaTalk ng® converter.
D12265-2
SeaTalk
ng
S
ea
Ta
lk
1
2
3
1. SeaTalk device
2. SeaTalk to SeaTalk ng® converter
3. MFD
4.9 NMEA 0183 connection —
Power/NMEA/Video cable
NMEA 0183 devices can be connected directly to
MFD s with a combined Power/NMEAVideo cable.
Refer to the Connection Overview section to
establish the NMEA 0183 connection method for
your MFD .
D13285-2
6 1 2 3 4 5
11 7 8 9 10 12
NMEA DEVICE
4800 / 38400 baud
NMEA DEVICE
4800 / 38400 baud
2 NMEA 0183 ports are available:
• Port 1 : Input and output, 4800 or 38400 baud rate.
• Port 2 : Input only, 4800 or 38400 baud rate.
The baud rate for each input port must be specified in
the
System Settings menu ( Homescreen > Set-up
> System Settings > NMEA Set-up > NMEA Input
Port
).
Note: For Port 1, both the input and output
communicate at the same baud rate. For example,
if you have one
NMEA 0183 device connected to
Port 1 INPUT, and another NMEA 0183 device
connected to Port 1 OUTPUT, both NMEA devices
must use the same baud rate.
You can connect up to 4 devices to the display's
output port and 2 devices to the display's input ports.
Ite-
m
Device
Cable
color
Port
Input /
output
Posi-
tive (+)
/ nega-
tive (-)
1 White 1 Input Positive
2
Green
1 Input Nega-
tive
3 Yellow 1 Output Positive
4 Brown 1 Output Nega-
tive
Multifunc-
tion dis-
play
Cables and connections 43