•
The machine must not be left unattended while it is operating (supervised operation).
•
Switch off the machine described herein at the main switch for periods of non-use.
•
Operate the machine described here only with a lens in place. A missing lens may cause the unfocused
laser beam to be reflected out of the housing.
•
Stop this machine immediately in case of failure.
•
No working methods are permitted that affect the safety of persons or of the machine.
•
The machine and its components, such as the lens and mirrors, are to be kept clean at all times.
Caution
The adjustment of the beam path may only be carried out by service personnel of Trotec Laser
GmbH.
2.4 Requirements for operating an service personnel
The requirements for the operating and service personnel are:
•
The personnel must have read and understood this manual and in particular the "Safety" section.
•
The personnel must not be under the influence of drugs, alcohol or reactivity affecting medication when
working on or with the machine.
•
The personnel must be familiar with using the CO
2
fire extinguisher.
•
The personnel must be trained in order to be qualified to operate the machine. If the personnel lack the
necessary knowledge for working on or with the machine, they must first be trained and note down the
training in the training verification form.
Activity
Intended user
group
Definition
Control/operation/other
activities (e.g. troubleshooting,
maintenance)
Qualified personnel
or Trotec service
technicians
Qualified personnel are those who can
judge the work entrusted to them and detect
potential risks based on their occupational
training, knowledge and experience as
well as their understanding of the relevant
regulations.
2.5 Machine identification (warning and safety stickers)
The warning and information signs are attached to the device at those places which could be a source of
danger before commissioning or during operation. Therefore pay special attention to the information on the
signs.
ENGLISH (Translation)
07/2021
19 / 83
