2.6 Safety devices
Warning
Danger from laser beam
.
Safety and protection devices that are not installed or are not fully functional can lead to bodily
injury and material damage.
– Do not remove, modify or deactivate the interlock safety switches or protective covers on
the machine. Safety and protection devices must be fully functional at all times.
– In case of assumed or presumed damage of safety devices, disconnect the machine from
the mains.
– Damaged safety and protection devices need to be replaced by a Trotec technician
immediately.
2.7 Technical protective measures
2.7.1 Main switch
Pressing the main switch on the backside of the machine to disconnect the machine from the mains power
supply.
2.7.2 Key switch
Turning the key switch counterclockwise powers off the motor, laser source and electric system. Through the
key switch, operation by non-authorized personnel can be prevented.
2.7.3 Emergency stop button
Pressing the emergency stop button immediately switches off the circuit.
The laser beam is interrupted and all movements are stopped.
The task of the emergency stop switch is:
First priority:
Prevention of danger to the operating personnel.
Second priority:
Prevention of damage or destruction of the machine and/or material.
ENGLISH (Translation)
07/2021
22 / 83
