4.2 Laser power potentiometer
With Laser power potentiometer you can electrically adjust the laser power during the engraving or cutting
process. Adjustments of ±20% are possible. Both laser sources can be regulated.
This application can, for example, increase the laser power when cutting outer contours so that the job does
not have to be started again.
❶
The bar graph shows the current laser power
during cutting/engraving, the display is time-limited
and is updated at short intervals. The flickering during
processing corresponds to the current power.
❷
By default, this bar graph is always exactly in the
middle when the machine is started up, on MODIFY.
Modify means factor 1. The laser power corresponds
to the power set in JobControl® Expert.
❸
Rotary wheel for regulation.
One line on the bargraph 2 corresponds to about
5%. Four discrete steps can be made per side (MIN/
MAX). By pressing the rotary wheel, the initial state is
restored with factor 1. The settings are not saved and
are lost when the machine is restarted.
4.3 Tables
Aluminum slat cutting table
The cutting table with aluminum slats is ideal for
cutting thicker materials (from 8 mm thickness) and
for parts over 100 mm wide. The lamellas can be
arranged individually, so the table can be adapted to
any individual application.
ENGLISH (Translation)
07/2021
36 / 83
