The service operation is therefore declared as laser class 4 (US: class IV) and proper precautions need to be
taken (see "Laser classification").
2.1.6 Applicable safety regulations
The following directives and guidelines must be observed to avoid hazards when operating Trotec laser
systems:
Guidelines/Regulations
2006/42/EC
EC Machinery Directive
2014/30/EU
EMC Guideline
Applied harmonized standards
EN ISO 12100:2011-03
Safety of machinery - General principles for design - Risk assessment and
risk reduction.
IEC 60825-1:2014,
EN 60825-4:2011
Safety of laser products - Part 1: Equipment classification and requirements.
IEC 60204-1:2005
Safety of machinery - Electrical equipment of machines - Part 1: General
requirements.
ISO/DIS 11553-1:2009-03
Safety of machinery - Laser processing machines - Part 1: General safety
requirements.
IEC 61000-6-4:2007-02
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards -
Emission standard for industrial environments.
ISO 13857:2008
Safety of machinery - Safety distances to prevent hazard zones being
reached by upper and lower limps.
EN 55011+A1:2016-05
Industrial, scientific and medical equipment - Radio-frequency disturbance
characteristics - Limits and methods of measurement.
Notice
Safety norms and regulations.
The general guidelines and directives listed within this manual may differ according to locality,
region or country.
Therefore, always observe the directives as well as the regulations of the institutions for
statutory accident insurance association applicable to you. The operator is responsible for
fulfilling all safety requirements, as Trotec Laser GmbH has no influence on the proper use of
the machine.
Observe the official regulations for your business location in accordance with the applicable
local legal regulations (on accident prevention regulations or employee protection), e.g. DGUV
regulation 11 for Germany.
ENGLISH (Translation)
07/2021
15 / 83
