2 ) System Components
2.1 ) Heads Up Display
The Heads Up Display (HUD) is the primary user interface used to monitor real-
time temperature measurements and system status, manually control the kennel's
fan (if installed), and adjust system settings. When an alert condition exists, the
HUD will display the alert message and can be used to reset the alert. The HUD is
equipped with a back-light for the display. It is controlled by the left button and can
be set to one of three brightness levels or turned off. When the system is powered
up, the back-light will return to the brightness level it was set at when it was last
turned off.
F3-G2 System Manual - Rev 7
Page 5 of 33
Drawing 2.1.1: HUD Front
Multifunction Buttons
LCD Display
POD Interface Jack
Remote/Pager Charging Port
Drawing 2.1.2: HUD Display
Button Label (Back-light)
Button Label (Press – Menus / Hold - Power)
Button Label (Fan)
Fan Speed
Back-light Level
Sensor Temperatures
Temperature Trend Arrows
Heat Alert
System Status
Deployment
System Status