8.18 ) Placement of Heads Up Display (HUD)
The HUD is the system's user interface used for information read-outs and feature
programming therefore easy access to the HUD visually and physically is vital. We
have included an articulating mount that can be used for this purpose. This mount
easily attaches to the HUD using the self-tapping screws included in your hardware
pack. Once the location has been determined (we recommend the intended user
be involved in this decision) the base of the mount can be permanently attached to
the vehicle utilizing the two-sided tape already on the base. This tape is extremely
adhesive so you will only get one shot.
If you wish to mount the HUD directly to the dashboard as shown below (photo on
the right), either attach the HUD using the self-tapping screws or attach with
Velcro® or two-sided tape.
Note:
Take care to route the communication cable away from excessive heat
sources or points of possible abrasion.
F3-G2 System Manual - Rev 7
Page 27 of 33
Drawing 8.18.1: Example HUD Mounting Locations
On top of the dashboard
On the facing of the dash
