1.2 ) Deployment
When the Deploy-K9 button is pressed on the Remote/Pager, a command is sent
to the POD to unlock and then unlatch the deployment door so that the gas push-
rod can push the door open.
Deployment Safety Lock-out:
Either a Park/Neutral or vehicle speed signal input
can be used to automatically disable the deployment feature when the vehicle is in
gear or moving, respectively.
Unlock Output:
This feature unlocks the deployment door prior to unlatching it
and has a programmable output duration for vehicle compatibility.
Unlatch Output:
After unlocking the door, the system activates a solenoid inside
the deployment door that is mechanically connected to the latch mechanism
causing the latch to disengage.
Window Drop:
The left, right, or both windows can be set to drop immediately
after a deployment. This feature, if used, is typically enabled on the deployment
door in order to deter a second suspect from holding the deployment door closed.
If used, there should not be a window guard installed on the deployment door.
F3-G2 System Manual - Rev 7
Page 4 of 33
