CHAPTER
10
016-4010-008 Rev. A
79
CHAPTER 10
ROADWAY HOMOLOGATION
The Accept Roadway Homologation Terms page will be displayed during the initial calibration of the SC1/TC1
system in either of the following conditions:
• Operating with a generic tune-set
• Operating on the European continent
Carefully review the on-screen disclaimer before proceeding.
FIGURE 1. Roadway Homologation
When roadway homologation is accepted, the following parameters will be applied to SC1/TC1 operation:
• An operator presence method will be required while operating with the SC1/TC1 auto-steering system enabled.
• Auto-steering cannot be enabled above 10 mph (16.1 km/h).
• Auto-steering will disengage above 12 mph (19.3 km/h).