CHAPTER 6
58
Raven SC1™/TC1™ (software version 1.5) Calibration & Operation Manual for Towed Implements
GPS RECEIVER SETUP
To configure the type of receiver connected to the SC1/TC1 system:
1. From the SC1/TC1 Home screen, select the Settings Menu button.
2. Select the GPS Setup tab and the GPS Receiver Setup button.
3. Select the receiver supplying GPS to the SC1/TC1 system:
•
Raven 500S™
•
Raven 600S™
•
Raven 700S™
•
Viper 4/4+ Twin
•
Viper 4/4+
•
Receive Only
NOTE:
Receive Only can be used with any GPS Receiver that is outputting GPS into the serial port of the SC1/
TC1 system. The GPS Receiver may need to be configured to output the correct messages if the
Receive Only option is selected. Refer to the
additional information on required GPS receiver outputs for SC1/TC1.
FIGURE 11. GPS Setup Screen
4. Select the Accept button in the lower, right corner of the screen to return to the GPS Setup tab.
DIFFERENTIAL CONFIGURATION SCREEN
To set the differential solution used with the SC1/TC1 system:
1. From the SC1/TC1 Home screen, select the Settings Menu button.
2. Select the GPS Setup tab and the Differential Configuration Setup button.
3. Select source of differential position corrections provided to the SC1/TC1 system.
4. Select the Accept button in the lower, right corner of the screen to return to the GPS Setup tab.
