CHAPTER 6
56
Raven SC1™/TC1™ (software version 1.5) Calibration & Operation Manual for Towed Implements
1. From the SC1/TC1 Home screen, select the Settings Menu button.
2. Select the GPS Setup tab and the Serial Output Configuration button.
3. Select the Radio Modem from the Config Types drop-down.
4. Select the stored radio modem in the Radio Base drop-down list.
5. Select the Delete button.
6. Select the Accept button to confirm removing the stored base and return to the Serial Output Configuration
page.
FIGURE 8. Configured Radio Base
7. Select the Accept button in the lower, right corner of the screen to return to the GPS Setup tab.
GPS SERIAL OUTPUT CONFIGURATION
To configure GPS message output from or passed through the SC1/TC1 system:
1. From the SC1/TC1 Home screen, select the Settings Menu button.
2. Select the GPS Setup tab and the Serial Output Configuration button.
3. Select GPS Out from the Config Types drop-down to output 3D compensated GPS to another ECU.
4. Select the Baud rate and frequencies for specific message types.
5. Select the Accept button in the lower, right corner of the screen to return to the GPS Setup tab.
