CHAPTER 5
40
Raven SC1™/TC1™ (software version 1.5) Calibration & Operation Manual for Tractors and Sprayers
1. From the SC1/TC1 Home screen, select the Settings Menu button.
2. On the Machine Settings tab, select the Node Orientation button.
3. Use the rotation buttons to rotate the node image in 90° increments. The node image shown on the screen
should match the orientation of the ECU in the machine cab.
NOTE:
The SC1/TC1 ECU must be mounted in a horizontal orientation. Vertical orientations are not
supported.
4. Select the Accept button in the lower, right corner of the screen to return to the Machine Settings tab.
STEERING SETUP TAB
FIGURE 6. Steering Setup Screen
The Steering Setup tab displays the steering partner with which SC1/TC1 works during auto-steering operation.
The Steering Setup tab offers settings and options which allow the operator to fine-tune the steering system.
NOTE:
The Steering Setup tab will not be available if the SC1/TC1 system is calibrated for the GPS Only mode.
ADVANCED TUNING
FIGURE 7. Advanced Tuning Menu
