GPS Settings: Configure GPS in the SC1/TC1
57
GPS SETTINGS
FIGURE 9. GPS Configuration
RTK OUT
To configure RTK corrections output from or passed through the SC1/TC1 system:
1. From the SC1/TC1 Home screen, select the Settings Menu button.
2. Select the GPS Setup tab and the Serial Output Configuration button.
3. Select RTK Out from the Config Types drop-down to output 3D compensated RTK to another ECU.
4. Select the Baud rate for corrections.
5. Select the Accept button in the lower, right corner of the screen to return to the GPS Setup tab.
FIGURE 10. RTK Out
