Raven Case IH AutoBoom XRT, Calibration & Operation Manual

Page: 14 / 72

C
HAPTER
3
10 Case IH AutoBoom XRT Calibration & Operation Manual
HEIGHT SENSORY SENSITIVITY
Height Sensor Sensitivity can be adjusted by typing the value into the Height Sensory Sensitivity field. This value
affects the ability of the radar sensor to distinguish between spray, crop, and ground.
NOTE: A Height Sensory Sensitivity range of 1-20 is ideal for reduced canopy detection or high spray drift
suppression.
A Height Sensory Sensitivity range of 20-100 allows the sensor to be more sensitive in detecting a
canopy, however, as the Height Sensory Sensitivity value increases, drift suppression decreases.
The Height Sensory Sensitivity value is set to 45 by default.
TARGET TYPE
FIGURE 5. Target Type
Press the Target Type to select between the desired measurement target:
• Ground : This target type will use the ground signal as the primary target, but will use the canopy signal
if it has a higher confidence level.
• Ground Locked : This target type will only use the ground signal as a target.
• Canopy : This target type will use the canopy signal as the primary target, but will use the ground signal
if it has a higher confidence level.
• Canopy Locked : This target type will only use the canopy signal as a target.