GB
Page 9 of 32
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G1150.30MAGIC - G1150.30MAGICIT
RAVAGLIOLI S.p.A.
7107-M001-0_R
• Protect the exposed corners with suitable material
(Pluribol/cardboard).
• Do not use metallic cables for lifting.
• Sling with belts long at least 450 cm and with a ca-
pacity load greater than 2500 kg.
Then carry out the lifting using the bracket (
Fig. 4
pos. 1
).
Fig. 4
Fig. 5
7.0
MOBILIZATION
THE LIFTING EQUIPMENT MUST WITHSTAND
A MINIMUM RATED LOAD EQUAL TO THE
WEIGHT OF THE MACHINE (SEE PARAGRAPH
TECHNICAL SPECIFICATIONS). DO NOT ALLOW
THE LIFTED MACHINE TO SWING
If the machine has to be moved from its normal work
post, the movement must be conducted following the
instructions listed below.
8.0
WORKING ENVIRONMENT CONDI-
TIONS
The machine must be operated under proper conditions
as follows:
• temperature: 0° +55° C
• relative humidity: 30 - 95% (dew-free)
• atmospheric pressure: 860 - 1060 hPa (mbar).
The use of the machine in ambient conditions other than
those specified above is only allowed after prior agree-
ment with and approval of the manufacturer.
8.1
Work position
Fig. 5
show work positions
A
and
B
which will be re-
ferred to during the description of the machine operat-
ing phases.
Position
A
is the main positions for wheel fitting and
removal with the chucking table, while position
B
is ideal
to follow tyre inflation operations.
Working in these positions allows better precision and
speed during operating phases as well as greater safety
for the operator.
8.2
Installation space
INSTALL THE MACHINE INDOORS OR IN A
ROOFED AREA. PLACE OF INSTALLATION
MUST BE DRY, ADEQUATELY LIT AND IN COM-
PLIANCE WITH APPLICABLE SAFETY REGULA-
TIONS.
