background image

GB

Page 28 of 32

INSTRUCTION, USE AND

MAINTENANCE MANUAL

G1150.30MAGIC - G1150.30MAGICIT

RAVAGLIOLI S.p.A.

7107-M001-0_R

Fig. 54

The validity of the Conformity Declaration enclosed

to this manual is also extended to products and/or

devices the machine model object of the Conformity

Declaration can be equipped with.

16.0 STORING

If storing for long periods (6 months or longer) discon-
nect the main power supply and take measures to pro-
tect the machine from dust build-up. Lubricate parts
that could be damaged from drying out. When putting
the machine back into operation replace the rubber pads
and the mounting tool. Moreover, carry out a verifica-
tion of machine perfect functioning.

17.0 SCRAPPING

When the decision is taken not to make further use of
the machine, it is advisable to make it inoperative by
removing the connection pressure hoses.
The machine is to be considered as special waste and
should be dismantled into homogeneous parts.
Dispose of it in accordance with current legislation.

17.1 Instructions for the correct manage-

ment of waste from electric and elec-

tronic equipment (in italian RAEE)

according to legislative decree 151/

05

• RAEE may not be disposed of as urban waste.
• These kinds of waste must be collected separately and

taken to dedicated collection and recycling centres,
according to OEM instructions and abiding by national
laws.

• The above symbol on the product means that anyone

wishing to dispose of the waste must follow the above-
mentioned instructions.

• Any incorrect management of the waste or its parts or

its abandonment outside dedicated areas could con-
taminate the environment, owing to the dangerous
substances contained in it, and cause damage to hu-
man health, flora and fauna.

• National laws provide for sanctions against those re-

sponsible for illegal disposal or abandonment of waste
from electric and electronic equipment.

CAUTION: DO NOT TAMPER WITH,

CARVE, CHANGE OR REMOVE THE

IDENTIFICATION PLATE;DO NOT

COVER IT WITH PANELS, ETC.,

SINCE IT MUST ALWAYS BE VIS-

IBLE.

Said plate must always be kept clean.

WARNING: Should the plate be accidentally damaged
(removed from the machine,damaged or even partially
illegible) inform immediately the manufacturer.

19.0 FUNCTIONAL DIAGRAMS

Here follows a list of the machine functional diagrams.

18.0 REGISTRATION PLATE DATA

Summary of Contents for G1150.30MAGIC

































Reviews: