GB
Page 8 of 32
INSTRUCTION, USE AND
MAINTENANCE MANUAL
G1150.30MAGIC - G1150.30MAGICIT
RAVAGLIOLI S.p.A.
7107-M001-0_R
Fig. 3
5.0
PACKING AND MOBILIZATION FOR
TRANSPORT
HAVE THE MACHINE HANDLED BY SKILLED
PERSONNEL ONLY. THE LIFTING EQUIPMENT
MUST WITHSTAND A MINIMUM RATED LOAD
EQUAL TO THE WEIGHT OF THE PACKED MA-
CHINE.
The machine is packed in a carton box which size is
mm 750x1900x1300.
Movement must be by pallet-lift or fork-lift trolley. The
fork lifting points are indicated on the packing.
6.0
UNPACKING
The cardboard box is supported with plastic strapping.
Cut the strapping with suitable scissors.
Use a small knife to cut along the lateral axis of the box
and open it like a fan.
It is also possible to un-nail the cardboard box from the
pallet it is fixed to.
After removing the packing, and in the case of the ma-
chine packed fully assembled, check that the machine is
complete and that there is no visible damage.
If in doubt
do not use the machine
and refer to profes-
sionally qualified personnel (to the seller).
The packing (plastic bags, expanded polystyrene, nails,
screws, timber, etc.) should not be left within reach of
children since it is potentially dangerous.
These materials should be deposited in the relevant col-
lection points if they are pollutants or non biodegrad-
able.
WHEN UNPACKING THE MACHINE,
ALWAYS WEAR GLOVES TO PRE-
VENT SCRATCHES AND CUTS
CAUSED BY CONTACT WITH PACK-
ING MATERIAL (NAILS, ETC...).
THE BOX CONTAINING THE ACCES-
SORIES IS CONTAINED IN THE
WRAPPING. DO NOT THROW IT
AWAY WITH THE PACKING.
