RAUMEDIC MPR1, Instructions Manual

Page: 72 / 98

Instructions for Use MPR1 DATALOGGER
Manufacturer: zwo-399EN
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany Rev. 9, 2020-10-16
Page 72 of 98
The following table indicates how the different alarms are acoustically and optically noticed by the operator.
Alarm
condition
LED [6]
*1
LED [7]
*1
Display Sound
none green off normal none *2
sensor off yellow „Sensor ?“ approx. 30 s. break
medium
priority *3
off yellow
value
flashes
approx. 20 s. break
high priority red red
value
flashes
approx. 7 s. break
Table 7: Alarm conditions
*1: See Table 1 in chapter 2.3 Contraindications
*2: Individual actions are indicated by individual short sounds.
*3: Physiological and technical alarm
4.9.7 Verifying the alarm system
The alarm system can be verified at any time. Please observe when verifying the acoustic signal that the
muting / reset key has not switched off the acoustic alarm permanently. To verify the alarm system, proceed
as described in chapter 4.6.2 Device diagnostics. Please observe when verifying the alarm system that
alarms of high and medium priority are tested according to the table rendered above.
This
document
is
for
information
only