Instructions for Use MPR1 DATALOGGER
Manufacturer:
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany
Page 33 of 98
•
Trend + curves (short play)
•
Trend only (long play)
•
No storage
If you want to set long-play mode, use the arrow key to navigate to “only trend (long play)”. If you want to
accept the selected setting, you can now press OK. If you want to discard your selection, press the ESC
key to return to the previous step.
Software version
To save the selection, press OK. To cancel your selection and return to the previous step, press ESC.
Software version
Once the memory mode is specified, press OK to close the window. You cannot close the window if any
pulldown menus are still open. Once the memory mode is selected, it remains saved even after the device
is switched off and appears again as the base setting when the device is switched on again. It can then be
changed with the same procedure.
When you close the window, you go to screen . "Alarm limits selection" 4.3
reached first, provided "New patient" was selected. Under "Continue measurement" this step is omitted.
This
document
is
for
information
only
