Instructions for Use MPR1 DATALOGGER
Manufacturer:
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany
Page 64 of 98
The scaling settings for Setup 2
have been accepted, but they are
not active yet.
In order to change the settings,
press the Menu key. The available
settings will be rendered in the
pull-down menu. The arrow keys
are used to change the requested
settings, such as Setup 3.
Subsequently close the window by
pressing on OK.
The scaling settings for Setup 3
have been accepted, but they are
not active yet. The settings can be
cancelled by pressing on ESC.
Close the window by pressing on
OK to activate the settings.
4.7 Activating the key lock
Activation:
Skip into the overview screen and press the Shift + F5 key (key symbol)
.
A pop-up window will render information on the active key lock “Button block active – to unblock button
press F5 and hold”.
This note will disappear again after 5 seconds without having to press a key.
Function:
The active key lock locks all keys except the lamp and the alarm muting / reset. The background illumination
in battery operation can also be switched on and off, and acoustic alarms can be muted. The alarm
suppression by long key depression cannot be activated, however. If a locked key is pressed, a signal (for
approx. 1 s) is sounded and the pop-up window mentioned above is displayed again (for 5 seconds).
Deactivation:
Deactivate by pressing and holding F5
.
Step 1:
Skip to the overview screen and
press the Shift key.
Step 2:
Subsequently press the F5 key
(key).
Step 3:
The key lock is active.
This
document
is
for
information
only
