Instructions for Use MPR1 DATALOGGER
Manufacturer:
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany
Page 49 of 98
4.4.3.6 Measuring the CPP
If an invasive pressure input is configured as ICP (ICP1 or ICP2) and another as ART on the MPR1, the
operand CPP (Cerebral Perfusion Pressure) is calculated automatically. If two pressure channels have
been configured as ICP, thus ICP1 and ICP2, the CPP is always calculated from ART and ICP1. In screen
the CPP is displayed as a numerical value in the lower text line. The graphical display is rendered in
the trend only. The limiting values and the alarm activation / deactivation are set when the ICP limiting
values are set.
CPP displayed as a numerical
value in screen .
CPP displayed as a curve in
screen .
Setting the CPP alarm limits in
screen .
4.4.4 Transducer for temperature measurement
Please observe chapter 3.4
Measurement of the body temperature.
Use approved accessories only.
The MPR1 has two temperature input sockets Temp-1 and Temp-2 to connect temperature sensors
(temperature sensors from Exacon or RAUMEDIC multi-parameter catheter with integrated temperature
measurement). It is insignificant for the further measurement, to which of the two input sockets the
temperature sensor is connected. The temperature sensor connected is recognised automatically. The
same applies corresponding, if you want to connect another temperature sensor. If the temperature to be
measured is within a range of 15° Celsius < T < 45° Celsius, the temperature will be displayed in the
measured value field of the overview screen .
Please keep in mind that apart from the catheter, the ICP-Temp cable, article No. 094328-001, and
the ICP-Temp separator with jack plug, article No. 094323-001, are required when the RAUMEDIC
multi-parameter catheters with temperature measurement are used.
One
temperature sensor
connected to input Temp-1.
Second temperature sensor
connected to input Temp-2.
In the graphics screen, the
temperatures are displayed as
numerical values only.
This
document
is
for
information
only
