AXIS-H EMC
Using the manual
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: [email protected]
Page
1
of
1
27.10.2014
Chapter 120
The AXIS-H EMC workshop manual is divided into several chapters. The different topics
are arranged in these individual chapters.
Not using page numbers was an intentional decision as this workshop manual is to be
extended by additions and further developments to take into account the technical
development of the spreader.
Completely new topics are to be included in new chapters: e.g. 390.
If existing instructions or topics are updated or extended, new pieces of information are
added with a consecutive number:
e.g. old chapter = 390 => Chapter addition 391
This manual has been prepared for practical application directly at the device and is to
guide the user step by step through repairs and troubleshooting.
If any chapters are unclear or not logical, please inform us briefly by email at
. We would be pleased to receive your requests and suggestions and
will consider their implementation.
We wish you lot of success in repairing and hope you enjoy working
with the products of
Rauch Landmaschinenfabrik GmbH
